MINIMIZATION OF SCHEDULE OF THE DESIGN-ENGINEERING PREPARATION OF HIGH-PRECISION PRODUCTION USING THE EXPERT SYSTEM

Receipt date: 
11.10.2017
Year: 
2017
Journal number: 
УДК: 
658.512, 004.942
Article File: 
Pages: 
50
56
Abstract: 

The trend of miniaturization of the sizes of electronic industry products and their constant improvement leads to the need to modernize the existing fleet of equipment, to rapidly master the production of a large number of new products whose output volumes are small. Digitalization of production leads to the accumulation of a large amount of information. Analysis of design and technological documentation in PDM / PLM-systems, information on production and operation of the manufactured products will make it possible to choose the most successful design and production technology, shortening the time and cost of its preparation, avoiding a lot of expensive field experiments. Expert system Integration of PDM / PLM-systems data, production management systems and process control systems, alongside with non-formalized knowledge of domain experts as an addition, will allow obtaining a more complete description of the products within the digital model of the product and using the intellectual potential of the enterprise in designing and manufacturing products. There are a number of examples of development and implementation of expert systems in production, but all of them are tailor-made and narrowly focused, therefore, expert systems are unique for each enterprise.

List of references: 

1.      Govorkov A.S., Ch'en H.V. Razrabotka avtomatizirovannoj sistemy proektirovanija tehnolog-icheskih processov izgotovlenija izdelija makshinostroenija na osnove trehmernoj modeli [Development of an automated system for the design of technological processes for the manufacturing of machine-building products on the basis of a three-dimensional model]. Sovremennye tehnologii. Sistemnyj analiz. Modelirovanie [Modern Technologies. System Analysis. Modeling], 2015, No. 4 (52), pp. 48-55.

2.      Pashkov A.E. Avtomatizirovannaja tehnologija kombinirovannogo formoobrazovanija panelej samoletov [Automated technology of combined shaping of aircraft panels]. Izvestija Samarskogo nauchnogo centra Rossijskoj akademii nauk [Izvestia of Samara Scientific Center of the Russian Academy of Sciences], 2013, Vol. 15, No. 6-2, pp. 453-457.

3.      Dunaev M.P., Dunaev A.M., Kargapol'cev S.K., Gozbenko V.E. Metod strukturirovanija bazy znanij jekspertnoj sistemy dlja diagnostirovanija jelektricheskogo oborudovanija [A method of structuring the knowledge base of the expert system for diagnosing electrical equipment]. Sovremennye tehnologii. Sistemnyj analiz. Modelirovanie [Modern Technologies. System Analysis. Modeling], 2017, No. 1 (53), pp. 86-89.

4.      K'jusiak Je. (ed.). Iskusstvennyj intellekt. Primenenie v integrirovannyh proizvodstvennyh sistemah [Artificial intelligence. Application in integrated production systems]. Moscow: Mashinostroenie Publ., 1991, 544 p.

5.      Subrakhmanyam, P., Wozny, M., 1995, An overview of automatic feature recognition techniques for computer-aided process planning, Computers in industry. Vol. 26, pp. 1–21.

6.      Chimitov P.E. Razrabotka matematicheskoj modeli sborochnyh processov s ispol'zovaniem metodov raspoznavanija obrazov : Ph.D. (Engineering) thesis [Development of a mathematical model of assembly processes using imaging techniques: Ph.D. (Engineering) thesis]. Irkutsk, Irkutsk state techn. university, 2010.

7.      Lavrent'eva M.V., Ch'en H.V. Avtomatizirovannoe proektirovanie jelektronnyh maketov jele-mentov sborochnoj osnastki posredstvam programmnogo modulja NX/OPEN API [Computer-aided design of electronic models of assembly components using the NX / OPEN API software module]. Izvestija Samarskogo nauchnogo centra Rossijskoj akademii nauk [Izvestia of Samara Scientific Center of the Russian Academy of Sciences], 2013, Vol. 15, No. 6-2, pp. 395-399.

8.      Ahatov R.H., Lavrent'eva M.V. Raspoznavanie konstruktivno-tehnologicheskogo sostava izdelija po ego jelektronnoj modeli [Recognition of the structural and technological composition of the product by its electronic model]. Sborka v mashinostroenii, priborostroenii [Assembling in Mechanical Engineering and Instrument-Making], 2015, No. 8, pp. 8-14.

9.      Irzaev G. Kh. Expert methods of industrial products manufacturability management. Moscow: Infra-Inzheneria Publ., 2010, 192 p.

10.    Irzaev G. Kh. Issledovanie i modelirovanie informacionnyh potokov konstruktorsko-tehnologicheskih izmenenij na jetapah osvoenija i serijnogo proizvodstva izdelij [Research and modeling of information flows of design and technological changes at the stages of development and serial production of products]. Organizator proizvodstva [Organizer of production], 2012, Vol. 52, No. 1, pp. 131-135.

11.    Irzaev G. Kh. Jekspertnye metody upravlenija tehnologichnost'ju promyshlennyh izdelij: monografija [Expert methods of the industrial products manufacturability control: monograph]. Moscow: Infra-Inzhenerija Publ., 2010, 192 p.

12.    Kabanov A.A. Ob#ektnaja model' analiza izdelij LA s uchetom javlenija nasledovanija dlja ocenki i upravlenija jeffektivnost'ju proizvodstvennyh sistem diskretnogo mashinostroenija v hode ih organizacionno-tehnicheskogo proektirovanija i modernizacii [The object model of the analysis of aircraft products taking into account the inheritance phenomenon for the evaluation and control of the efficiency of industrial discrete engineering systems in the course of their organizational and technical design and modernization]. Nauchno-tehnicheskij vestnik Povolzh'ja [Scientific and technical Volga region bulletin], No. 6, 2014. Kazan': Nauchno-tehnicheskij vestnik Povolzh'ja Publ., 2014, pp. 161-168.

13.    Khusainov, R.M., Sharafutdinov, I.F. Methods of assessing the dynamic stability of the cutting process using UNIGRAPHICS NX.  IOP Conf. Series: Materials Science and Engineering 134 (2016) 012042.

14.    Krastyaninov, P.M., Khusainov, R.M. Selection of equipment for machining processing of parts using NX and TEAMCENTER programs. IOP Conf. Series: Materials Science and Engineering 134 (2016) 012041

15.    Savchenko A.A., Kaimov E.V., Karlina A.I. Vlijanie struktury vneshnih vozdejstvij na dinamich-eskie svojstva mehanicheskih kolebatel'nyh sistem [Influence of the structure of external influences on the dynamic properties of mechanical oscillatory systems]. V knige: Kulaginskie chtenija materialy XI Mezhdunarodnoj nauchno-prakticheskoj konferencii [In the book: Kulagin readings, materials of the XIth International Scientific and Practical Conference], 2011, pp. 203-205.

16.    Karlina A.I., Gozbenko V.E. Modelirovanie ob#ektov mashinostroenija dlja snizhenija vlijanija vneshnih vibracionnyh vozdejstvij [Modeling of machine-building objects to reduce the influence of external vibration effects]. Vestnik Irkutskogo gosudarstvennogo tehnicheskogo universiteta [Proceedings of Irkutsk State Technical University], 2016, Vol.  20, No. 10, pp. 35-47.

17.    Karlina A.I., Gozbenko V.E., Kargapol'cev S.K. Glavnye koordinaty v reshenii zadachi vertikal'noj dinamiki transportnogo sredstva [The main coordinates in solving the problem of the vehicle's vertical dynamics]. Sistemy. Metody. Tehnologii [Systems. Methods. Technologies], 2016. No. 3 (31), pp. 58–62.

18.    Gozbenko V.E., Kargapol'cev S.K., Karlina A.I. Privedenie dinamicheskoj sistemy s tremja stepenjami svobody k glavnym koordinatam [Reduction of the dynamic system with three degrees of freedom to the main coordinates]. Sovremennye tehnologii. Sistemnyj analiz. Modelirovanie [Modern Technologies. System Analysis. Modeling], No.3(51), 2016, pp. 35-38.

19.    Karlina A.I., Kargapol'cev S.K., Gozbenko V.E. Privedenie obobshhennyh sil v matematicheskih modeljah transportnyh sistem [Reduction of generalized forces in mathematical models of transport systems]. Sovremennye tehnologii. Sistemnyj analiz. Modelirovanie [Modern Technologies. System Analysis. Modeling], No.3(51), 2016, pp. 177-180.

20.    Gozbenko V.E., Karlina A.I. Matematicheskaja model' vagona s dvumja stepenjami svobody, na-hodjashhegosja pod dejstviem periodicheskoj vynuzhdajushhej sily [A mathematical model of a car with two degrees of freedom, under the influence of a periodic coercive force]. Izvestija transsiba [Journal of Transsib Railway Studies], No.3 (27), 2016.

21.    Gozbenko V.E., Kargapolcev S.K., Kondratiev V.V., Karlina A.I., Minaev N.V. Vertical dynamics of the vehicle taking into account roughness gauge. Proceedings of the XV International Academic Congress "Fundamental and Applied Studies in the Modern World" (United Kingdom, Oxford, 06-08 September 2016). Volume XV. "Oxford University Press", 2016. pp. 373-383.

22.    Gozbenko V. E., Kargapoltsev S. K., Kornilov D. N., Minaev N. V., Karlina A. I. Simulation of the vibration of the carriage asymmetric parameters in MATHCAD []. International Journal of Applied Engineering Research (IJAER), Volume 11, Number 23 (2016), pp. 11132-11136.

23.    Gozbenko V.E., Kargapoltsev S.K., Kornilov D.N., Minaev N.V., Karlina A.I. Definition of the main coordinates of the car with two-level spring suspension. International Journal of Applied Engineering Research. 2016, Vol. 11, No. 20, pp. 10367-10373.

24.    Shtajger M.G. Problemy kachestva komponentov putevogo kompleksa [Problems of quality of components of the track complex]. Put' i putevoe hozjajstvo. Rossijskie zheleznye dorogi [Railway Track and Facilities. Russian Railways], 2011, No.12, pp.6-9.

25.    Shtajger M.G. Inspekcionnaja dejatel'nost' CTA v putevom komplekse [Inspection activity of the CTA in the track complex]. Put' i putevoe hozjajstvo [Railway Track and Facilities], 2011. No. 3, pp. 14-17.

26.    Aksenov S.A., Chumachenko E.N., Kolesnikov A.V., Osipov S.A. Determination Of Optimal Conditions For Gas Forming Of Aluminum Sheets. Procedia Engineering 11th, 2014, pp. 1017-1022.

27.    Aksenov S.A., Zakhariev I.Y., Kolesnikov A.V., Osipov S.A. Characterization of superplastic materials by results of free bulging tests. Materials Science Forum, 2016, Vol. 838-839, pp. 552-556.

28.    Chimitov P.E. Formirovanie obraza izdelija dlja zadach proektirovanija tehnologicheskogo pro-cessa sborki planera samoleta sborki [Formation of the product image for the design tasks of the assembly process airframe assembly airplane]. Reshetnjovskie chtenija: materialy XII Mezhdunar. nauch. konf., posvjashh. pamjati general'nogo konstruktora raketno-kosmicheskih sistem akademika M.F. Reshetnjova (10-12 nojab. 2008, g. Krasnojarsk); pod obshh. red. I.V. Kovaljova [Reshetnev Readings: Materials of the XIIth International Conference. sci. conf., in the memory of the general designer of rocket-space systems of academician M.F. Reshetnev (10-12 November 2008, Krasnoyarsk); under the general edition of I.V. Kovalyov]. Krasnojarsk: Sib. state air space un-ty Publ., 2008, pp.183-184.

29.    Grechishnikov V.A., Khusainov R.M., Akhkiyamov D.R., Yurasov S.Y., Yurasova O.I. Identifying the primary  rigidity axes in the elastic system of a metal-cutting machine. Russian Engi-neering Research, 2016, Vol. 36, No. 8, pp. 673–676

30.    Kargapol'cev S.K., Nekrytyj M.V. Sposob pravki tonkostennyh obolochek [Method for straightening of thin-walled shells]. Patent for invention RUS 2141390 26.05.1998.

31.    Grechishnikov, V. A., Khusainov, R. M., Akhkiyamov, D. R., Yurasov, S. Y., Yurasova, O. I. Identifying the primary rigidity axes in the elastic system of a metal-cutting machine. Russian Engineering Research, 2016, Vol. 36, No. 8, pp. 673-676

32.    Emad P. Abouel Nasr, Ali K. Kamrani. A new methodology for extracting manufacturing features from CAD system. Computers & Industrial Engineering, 51 (2006), pp. 389–415.